11A. When should the Auto-spike system be inspected for repair?

A. After the system is deployed and used.

B. When you do vehicle inspection.

C. When you think about it.

.

11B. How many replacement spike cartridges come with each Spike-Strip device, and what is included in the package?

A. Eight Spikes, o-rings, and caps.

B. 100 spikes, three o-rings, and caps.

.

11C. In what situation might it be necessary to replace one or more sections of the system, and how is this process carried out?

A. Never. It is indestructible.

B. If the spike system is flipped and hit while on its side or upside down.

C. If a car has already been spiked and is hit by a metal rim.

.

11D. What should be checked during the Auto-Spike inspection after deploying the unit?

A. That the spikes are pushed in all the way.

B. That no spikes are missing or have fallen out.

C. That the cord and the bag are in good shape with no cuts or tears.

D. There is no need to check anything because it is indestructible.

.

11E. How should the Spike Strip and Cord Reel be re-sheathed to properly store the Auto-spike?

A. In the special pocket of the bag.

B. In the holster with the spikes on the bottom, the strap closed, and the cord reel wound up and stored on top of the strip with crank facing inward.

C. In the holster with the loop winder inside, on top of the strip or the strap of the holster going through the middle of the loop winder, then fastened.

D. Any way you want.

.

11F. How is the Auto-spike inspection performed to ensure that it is free of grass or debris that could affect its deployment?

A. Holding the system and shaking it to dislodge grass or debris.

B. Opening it up and washing with a hose or under a faucet.

.

11G. What precaution should be taken when tightening bolts during replacement of an Auto-Spike section?

A. Do not over tighten.

B. Do not worry. Tighten up as hard as you want.

.

11H. How is spike replacement performed on the Auto-Spike?

A. Look for missing spikes and their holes, replace o-rings, and push spike into place.

B. Just push spikes into holes.

.

11I. What are the tools that may be needed to perform the service on the Auto-spike accordion frame?

A. Screw driver.

B. Hammer.